$10 Off $50 Order. $20 Off $100 Order. $30 Off $150 Order. Limited Time. View Terms

Therminator Wort Chiller

Therminator Wort Chiller

review
0
0
5
Your Price:$199.99
Item Number:54-1697

Would you like to add a Plate Chiller Backflush Adapter? help
Would you like to add a Kitchen Sink to Garden Hose Adapter? help
Would you like to add a Female Garden Hose Adapter? help
Would you like to add a Fitting (OUT)?
Would you like to add a Fitting (IN)?
BEST PRICE IN AMERICA ON THIS ITEM.
If you find a better delivered price let us know. Price comparisons must include all shipping charges and taxes. For the comparison, provide competitor's website address and your zip code.

The Therminator is the fastest way to chill wort to yeast pitching temperature and get fermentation off to a quick, bacteria-free start. The Therminator is able to Chill 10 gal (37.8 L) of wort in 5 minutes to 68°F (20°C) using 58°F (14.4°C) cooling water flowing at 5 gal/min (19 L/min).
  • All 316 stainless steel plates and fittings.
  • Identical to commercial brewery chillers.
  • Brazed together with pure copper in an oxygen free furnace.
  • No potential leaks like a gasketed unit.
  • Super low restriction makes this ideal for gravity feed.
  • Easy to clean and sanitize.
  • Male garden hose thread connections for water in/out.
  • 1/2" male NPT fittings for wort in/out.
  • Low water consumption.
  • Comes with heavy gauge stainless mounting bracket.
  • Compact: 7.5 x 4 x 3 (19 x 10.2 x 7.6 cm)
Click the picture for a closer look at threading and the mounting bracket.

The therminator has male garden hose fittings for the water in and out. If you are attaching a regular garden hose to it, you will need a female to female adapter.

The Plate Chiller Backflush Adapter makes it easy to attach a garden hose to the NPT threads of the heat exchanger to simplify washing. It can either be looped to pump hot cleaning solution (such as PBW) using a pump, or it can be attached to a faucet using a kitchen sink-to-garden hose adapter to push hot water through in the opposite direction of the normal wort flow.

Also recommended are the Blichmann QuickConnect fittings. These allow you to easily attach either 3/8" or 1/2" tubing to the wort side of the chiller. With these fittings, everything that touches the wort is either stainless steel or silicone. They install without tools, are easy to disassemble, and sanitizing is easy. You need one fitting for the wort in, and one for wort out. See below to add.

Special Note.
This is shipped directly from the manufacturer. Please allow for processing time and ground shipping. It can only ship to physical addresses within the contiguous 48 states. A signature for delivery is required.
 

Recently Viewed Items