Get all the great features of the Ruby Street Brewing System without the frame! This item includes all standard features of the Ruby Street minus the ruby red frame, allowing you to use these amazing kettles and other features with any pre-existing set-up.
Now Offering Free Shipping!
Lower 48 States Only
Because these are built to order please allow 4-8 weeks for delivery
Are you looking for an Electric Brewing System without a frame? One that comes almost completely assembled and ready to brew shipped right to your door? Then I urge you to really look at the Ruby Street Systems and compare them to any other system on the market. Here are just a few things to consider when comparing Ruby Street Electric Systems to other Electric Systems on the market:
Ruby Street Systems are hand built per order, with more available options and configurations than any other manufacturer. Ruby Street comes almost completely assembled and ready to brew, other systems have extensive assembly involved. Most Ruby Street systems include dial thermometers on various kettles, while some other systems do not. Ruby Street come standard with 2 false bottoms, others systems only come with 1 false bottom. Ruby Street utilizes a standard all stainless element coupled to a machined heavy duty stainless waterproof wiring housing that mounts to the kettle via TIG welded tri-clamp fitting, other systems don't offer this at all.
Ruby Street has industry standard tri-clamp sanitary fittings throughout while other systems don't. The Ruby Street electric panel has 3 digital PID controllers with temp readout of all 3 tanks, a process timer with alarm, pump switches on the panel, key switch for lockout safety, and a red mushroom emergency stop button that kills all power (pumps and elements). Other systems sometime feature two separate panels (requiring 2 outlets), only 2 PID controllers, no pump switches on the panels, no timer, no key switch, and no e-stop button.
Electric brewing is silent, economical, and safe for indoor use. Our electric systems include a full featured control panel that precisely controls heat to your HLT and Boil kettles, and allows you to monitor the temps of all 3 kettles right on the panel. The panels also include a digital brewing timer/alarm and pump control switches. On the brewery side you will find all stainless steel elements mounted to the kettles with welded in tri-clover fittings to allow super easy removal for cleaning.
Complete System Includes:
3-15.5 Gallon Stainless Steel Kettles (with lids)
2-5500 Watt Elements
1-30 amp Electric Panel (with digital temp and pump control)
2-Thru Wall Return Fitting (HLT & Mash)
2-Stainless Steel False Bottoms
1-Stainless Steel Pump (with remote On/Off switch)
All SS Tri-clover Fittings & Silicone Tubing
Complete Owners Manual (with 1 year limited warranty)
Electric Panel Features:
Wall Mounted all stainless steel control panel
6’ (4 wire) power supply cable with plug
3 Digital PID Controllers for setting and monitoring your process temps
1 Multi Event Brewing Timer with Alarm
2 On/Off Switches for pumps
2-4 Stainless steel 4500-5500 Watt elements (depending on model)
3 Temperature probes with quick disconnect cables
Key style power switch for secure storage
Locking mushroom button stops all power to elements and pumps
Safety Interlock Relay disables system if any switch (pump or element) is on during power-up
Displays temperature in either Fahrenheit or Celsius (user selectable)
Welded in tri-clover element adapters allow for easy element removal
Power Supply Options/Requirements:
Pump(s) - 110-120 VAC (50-60 Hz) – 220 v pumps available for international
All Electric – 240 VAC - 30 Amp GFCI
Kettles: 16.5” wide x 18.5”high
There are many ways to make this system your own by choosing all or only the options you want, please take a look at these options and select the one's that fit your style of brewing.
Now included, The HERMS System:
HERMS - (Heat Exchange Recirculating Mash System)
The HERMS System is used to maintain mash temperatures and perform step mashes without direct fired heat. The HERMS coil offers a 1/2"" x 50' stainless coil in the hot liquor tank that allows the brewer to recirculate the mash runoff through the coiled heat ex-changer and back into the mash tun. The coil is factory installed only and pressure tested before it ships.
The HERMS system will include:
50’ ½” SS HERMS coil mounted in the HLT with through wall fittings (tri-clover on top, ball valve and tri-clover at the bottom)
Optional 50 Amp Control Panel Upgrade
The Ruby Street electric system now offers this great option with the ability to simultaneously heat the HLT and Boil kettles at 50%power.
Each of these kettles has (2) elements in the kettle. This new upgraded panels now allows you to run 2 elements
in either, or 1 element in both (100% HLT, 100% Boil, or 50/50) with a convenient selector switch.
The biggest benefit of this is time savings, as this allows you to begin preheating your boil runoff while still
maintaining your HLT temp.
This will allow you to boil almost immediately upon hitting your target runoff volume.
Please see the options.
Optional Plate Chiller Package:
Ruby Street has a complete plate chiller package that will be installed on your Ruby Street frame.
· Duda Brand 30 Plate all Stainless Chiller mod# B3-36A
· Bracket to fit any of our frames powder coated to match
· Mounting hardware
· Tri Clover wort connections with 3” dial outflow thermometer
· Male and female garden hose fittings on water side of chiller
Optional Stainless Steel Hop Filter
The hop filter makes cleaning your brewery a breeze. The large capacity 6"" x 14"" 400 micron screen is made of 100% stainless steel. These screens will contain the majority off all hop material from both whole hops and pellet hops. We highly recommend this option when using plate chillers to avoid trapped hop material in your chiller. You can also recirculate through the hop filter while chilling to capture cold break protein material.
If you would like a thermometer installed on to your Mash, HLT or Boil kettles please see our options.
Optional Sight Glass for Boil or HLT
You can also get a sight gauge installed on your Boil kettle or HLT. Please see the options.
Optional Whirlpool Arm
If you would like a whirlpool arm assembly added to your Boil kettle please see the options.
3 piece ball valve w/tri-clamp connection
Optional 50 Foot Immersion Chiller
50 ft. Immersion Chiller is coiled with 3/8"" copper tubing and fitted with quality brass garden hose connectors.
Optional Thru-wall Return Fitting for Boil Kettle
Many brewers prefer to re-circulate and/or sparge with the kettle lids on. The thru-wall return fitting option makes this process easy. This fitting is generally mounted at the top of the kettle just below the rim.
Thru-wall fittings mounted in Boil kettles will include a silicone tube that reaches the bottom of the kettle to prevent splashing.
Thru-wall fittings mounted in the Mash Tun will include a cork float silicone sparging hose. Already included!
Thru-wall fitting mounted in the HLT is already included.
Please see the options
Optional Inline Oxygen Package
A fast and easy way to oxygenate your cooled wort. Equipped with stainless triclover fittings, this inline oxygen stone can be placed on the outflow side of your pump or chiller. Includes a regulator that attaches to a standard welding oxygen tank and 6’ of vinyl tubing. Please see the options.
Optional Extra Pump with Overflow Valve
While this system only requires one pump to be fully operational, some of our customers have asked for and additional pump for other uses in their brewing process. This a separate option, if you want an additional pump, please see the options.