Easily convert a freezer into a kegerator or controlled fermentation chamber. Place the temperature probe into the freezer, plug the thermostat into a wall electrical outlet, and then plug the freezer into the thermostat. Set the thermostat to the desired temperature. No more waiting for winter to brew favorite lagers.
The ETC also can control a heater such as a brewbelt. It can also be used to turn a pump on and off in a RIMS or HERMS type brewing system.
The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.
This controller is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
Finally, it has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.
- Temperature Range: -30Â° to 220Â°F
- Differential Range: 1 to 30Â°F
- Input Power: 120/208/240 VAC
- Sensor: 2" long x 1/4" Diameter, with 8 foot cable
- 6.5" long high x 2.7" wide x 2.5" deep