Propane Burner with 14" Stainless Steel Stand (220,000 BTU)
This propane burner and stand will support most homebrew kettles and will top out at an amazing 220,000 BTU! Frame is constructed of durable, high quality stainless steel and measures 14" x 14" x 11" Features:
- 4" high pressure burner
- 10 psi propane regulator
- Brass control valve
- 36" of LP Hose
- 14" x 14" x 11" burner stand.
- Tops out at 220,000 BTUs
If you are not getting the best flame possible out of your propane burner, you may have triggered a safety valve in the propane regulator body. This occurs when the gas flow through the regulator is too great. You will need to disconnect the regulator from your propane tank to release the safety valve. While connecting your regulator to your propane tank, it is very important that the propane tank and all needle valves are completely closed. Once the regulator is correctly connected to your closed tank, open the propane tank slowly to allow gas to flow into the regulator. You can now open the needle valve enough to ignite your burner. Once the burner is lit you can slowly open the needle valve until you reach the desired flame intensity.