Fermenator (42 gal) Standard Fittings

Fermenator (42 gal) Standard Fittings

Your Price:$1,100.93
Retail Price:$1,211.03
You Save:$110.10(9%)
Ships From Vendor

Item Number:54-4553

Would you like to add Fermenator Casters (42 gal)? help
Would you like to add Fermenator Leg Extensions (42 gal)? help
Would you like to add a Fermenator Tri-Clamp Blowoff Assembly? help
This Fermenator is 100% stainless steel. Everything that touches your beer is heavy gauge stainless steel. The interior is weld-free. There is no need to worry about bacteria hiding in weld cracks or in porosity found in all welds, even so-called sanitary welds.

- Dumping cold break and trub takes only a couple minutes.
- Collecting wort samples is quick and completely sanitary.
- Allows for easy harvesting of yeast.
- Pressurizeable for CO2 pumping.
- Impervious to UV light that causes "skunking" in beer.
- Large open top makes scouring and sanitizing the interior easy and painless.
- The rotating racking arm allows for siphoning completely sediment free beer. 

Wine-makers! Forms a 100% pressure and vacuum tight seal so no need for a floating lid! The sealing system is far superior to wine tanks and is completely impervious to oxygen. Most stainless wine fermenting tanks have a loose fitting lid for primary fermentation (to vent gas) and a floating lid for secondary fermentation (to prevent oxygen infiltration). This floating lid has an inflatable seal "tire" with a “bicycle pump” and must be checked periodically to be sure it hasn't deflated. It is also a source for bacterial contamination from the fermentation material on the walls of the fermentor. The blanket of CO2 on the surface of the wine from fermentation will protect the wine from oxidation. After complete fermentation has been verified remove the airlock and stopper and replace with a stopper with no hole.

Optional bolt-on leg extensions are available to elevate the Fermenator to make draining directly into a Cornelius keg easier. With the leg extensions, the bottom dump valve will be 23" (58cm) above the floor. See options below to add.

Another Fermenator option are the heavy duty industrial grade casters, making moving it much easier. 

The dimensions of the Blichmann conical are;

Width: 24"
Depth: 24"
Height: 73.75" 

Special Note.
This is shipped directly from the manufacturer. Please allow for processing time and ground shipping. It can only ship to physical addresses within the contiguous 48 states. A signature for delivery is required.

The blow off bucket is for demonstration purposes only and is not included.

Related Items

Fermenator (42 gal) Tri-Clamp Fittings
Ships From Vendor
Fermenator Casters (42 gal)
Fermenator Extension (from 27/42 to 60/80)
Ships From Vendor
Blichmann Fermenator Hatch Lid

Recently Viewed Items