Unfortunately, the beer gun is not ready to go straight out of the box. Everyone needs Accessory Kit #1. Many need Accessory Kit #2. Read the descriptions carefully because either you will have to provide this equipment yourself, or you can simply purchase this equipment as one or both of our accessory kits.
Beer Gun Accessory Kit #1 (Pin Lock)
This accessory kit provides almost everything needed to get your BeerGun up and running: a liquid pin-lock disconnect, a 5' length of hose for your CO2 line with 1/4" stainless flare connectors on each end, one stainless 1/4" disconnect (for the 10' beer hose that comes with the BeerGun), and a brass 1/4" NPT X 1/4" flare adapter for connecting to the CO2 valve on the BeerGun. Read below for information about Beer Gun Accessory Kit #2.
Beer Gun Accessory Kit #2
This kit is used to split the gas line at the regulator. It allows you to send gas to the beer gun while keeping gas on the beer. This can be used with both pin lock and ball lock kegs.
- Brass Wye (1/4" NPT to dual 1/4" Female NPT)
- Check Valve (1/4" MFL)
- Brass Nipple (1/4" MFL to 1/4" NPT)