Convert a refrigerator into a kegerator to dispense two
homebrew kegs from shanks. This kit has MFL fittings that allow for easy switching between ball lock disconnects, pin lock disconnects, and sankey couplers (with easy switch fittings). This kit includes a dual gauge regulator with both low and high pressure gauges on it.Includes:
- Two 5 gallon used pin lock kegs
- Taprite dual gauge regulator with 5/16" barb outlet and check valve (Made in Texas)
- Two 4 1/8" shanks with tailpieces
- Two black plastic faucet handles
- Faucet wrench
- Two pin lock liquid disconnects
- Two 5 ft sections of 3/16" beer lines with 1/4" mfl fittings
- Two pin lock gas disconnect
- Dual gas dispensing unit with two 5 ft sections of 5/16" gas lines with 1/4" mfl fittings, and a tee
- All needed hose clamps
- Two o-ring replacement setsThis kit includes two used kegs. All kegs are pressure tested and work. The outside of a keg may have minor dings and scratches. O-rings and poppets were only changed if the keg did not originally hold pressure.
Not included with the kit is a CO2 tank. It is not included so you can select the size of your CO2 tank. Select the tank size below.