2 Burner Hose Assembly (Propane)
This assembly allows you to connect two burners to only one propane tank. Complete your 2 burner system at the home with this efficient propane system. This assembly comes conveniently pre-assembled but does not include an orifice. Will fit any orifice with a 3/8" flare.
-10 PSI Regulator
-2 lengths of 6' High Pressure Hose 350 PSI 1/4" x 3/8" Brass Flare
-Brass 1/4" x 1/4" x 1.5" Fitting
-1/4" Brass Tee
-2 1/4" Needle Valves
If you are not getting the best flame possible out of your propane burner, you may have triggered a safety valve in the propane regulator body. This occurs when the gas flow through the regulator is too great. You will need to disconnect the regulator from your propane tank to release the safety valve. While connecting your regulator to your propane tank, it is very important that the propane tank and all needle valves are completely closed. Once the regulator is correctly connected to your closed tank, open the propane tank slowly to allow gas to flow into the regulator. You can now open the needle valve enough to ignite your burner. Once the burner is lit you can slowly open the needle valve until you reach the desired flame intensity.