A high quality grain mill constructed using materials that will last a lifetime, 1018 Cold Rolled Steel for the rollers, 6061 Aluminum for the mill body and hopper, tool steel for the axles with Oil Impregnated bronze bushings.

Details:

• Rollers are adjustable at both ends to keep the gap spacing parallel giving a uniform crush along the entire length of the rollers.


• The gap default setting is marked and set at .039 at assembly. Adjustment range is from .015 to .070 thousands of an inch.


• The rollers have a 12 TPI knurl to efficiently pull the grain through the rollers while leaving the hull intact to form an excellent filter bed for sparging.


• Comes with a solid base with locators to center the Barley Crusher on a 5 gallon plastic pail. (Pail not included)


• This hopper holds 7 pounds. Using a 3/8 drillmotor at 500 RPM gives you a crush rate of 6 pounds a minute making the big grain bills fast and easy.


• Minimal assembly required. There are no adapters needed to use a 3/8 drill motor.

NOTE: May take up to 15 days after we order it to arrive on your doorstep. YOU WILL NOT RECEIVE A TRACKING NUMBER FOR THIS ITEM. If you have not received your product in 15 days after we order it for you, you may call or email us. Thanks for your patience.